Information Bulletin RLCF-019: Co-processing Methodology

Last updated on October 23, 2026

Introduction

Co-processing refers to the simultaneous treatment of biogenic feedstocks and fossil-derived feedstocks in refinery process units to produce blended fossil and renewable fuel products. Under the B.C Low Carbon Fuel Standard (LCFS), the fossil portion of co-processed fuel is considered a base fuel and cannot earn positive compliance units or count toward renewable fuel supply requirements. Conversely, the renewable portion contributes to renewable supply requirements and is eligible to earn positive compliance units.

The renewable portion of co-processed fuel is physically indistinguishable from the fossil portion. This creates unique challenges in both quantifying the renewable volume within co-processed fuels, and in determining the Carbon Intensity (CI) of the renewable component.

This document provides guidance on how to determine the renewable fraction of co-processed fuel and outlines acceptable methods for determining the inputs required to model the renewable fuel’s CI. This document applies only to co processing that occurs in a refinery. Although other co-processing methods exist, they are not covered by this methodology. For more information, please contact the Low Carbon Fuels Branch (LCFB) at lcfs@gov.bc.ca.

This document focuses specifically on methodologies and requirements for co processed fuels. It does not provide general guidance on CI application procedures or modelling and should be used in conjunction with the guidance provided in RLCF-008: Carbon Intensity Applications and the applicable – pathway specific – GHGenius user guides available on the Renewable and low carbon fuel resources page.  

Glossary

Baseline Data:

Operating data attained when the refinery is producing fuel using 100% fossil-derived feedstock.

Benchmark Data:

Operating data attained when the refinery is co-processing with fossil and biogenic feedstocks. This data is used to determine the CI of the renewable portion of co-processed fuel. During the Benchmarking Period, operating conditions are representative of regular co-processing operations, and the renewable feedstock feed rate is at or above the maximum feed rate that will occur when fuel is produced for compliance reporting.

Benchmarking Period:

A period of 7+ days during which benchmark data is gathered. 

Co-processed Fuel: 

Fuel produced through simultaneous processing of biogenic and fossil-derived feedstocks in a refinery, resulting in a fuel that has fossil and renewable content.

Co-product:

A secondary product that is produced alongside the primary product during the refining process. Examples: naphtha, fuel gas, sponge gas, LPG, etc.

Method B:

Carbon-14 testing via accelerator mass spectrometry (ASTM D6866 - Method B).

Method C:

Carbon-14 testing via liquid scintillating counting (ASTM D6866 - Method C).

Operating Mode:

Fuel producers must apply for a unique CI if variations in operating conditions have a significant impact (defined below) on the CI of a fuel. The set of operating parameters associated with a CI is referred to as the operating mode. For example, if seasonal variation in operating parameters causes a significant impact to the CI, the fuel producer must obtain CIs for both the winter and summer operating modes.  

Significant Impact: 

Any input or output that impacts the co-processed fuel’s CI calculation by more than the greater of:

  • 5% of the fuel's CI, or
  • 1 gCO2e/MJ.

2. Data Collection and Testing Requirements

This section outlines data collection and testing requirements. The data gathered is used to inform allocation methodologies for CI determination, and to determine the biogenic content of the co-processed fuel for compliance reporting. Note that raw data does not need to be included with the Technical Report that accompanies the CI Application. The Technical Report must state how the requirements in this section are met, outline how modelling inputs were determined and, where relevant, provide supporting summarized or consolidated data tables.

The LCFS allows fuel producers to apply for either 1-year or 3-year fuel codes depending on their stage of development and the availability of operational data. Where applicable the 1-year vs. 3-year requirements are outlined in each section. 

Data collection and testing requirements for 3-year fuel codes are intended to align with the Canadian Government’s Clean Fuel Regulations (CFR) such that data collected for CFR benchmarking scenarios and annual credit creation may be used for LCFS CI applications and compliance reporting.

2.1. Baseline Data

Baseline data (operating data attained when the refinery is producing fuel using 100% fossil-derived feedstock) is used as a reference to determine the allocation of hydrogen, energy and chemical inputs to the biogenic fuel portion. A minimum of 7 consecutive days of baseline data covering each operating mode is required.   

The following baseline data collection requirements apply to both 1-year and 3 year fuel codes: 

  1. Baseline data must be collected within three years of the CI application date, or
  2. Baseline data may be collected 3+ years before the application date if the applicant demonstrates that current fossil feedstock refining operations are accurately represented by the older baseline data. Representativeness of the 3+ year old baseline data may be shown by providing a signed and sealed statement from a professional engineer confirming that: 
  • The 3+ year old baseline data is representative of present-day baseline operations
  • There have been no significant changes in the co-processing facility’s operational or energy efficiency since the 3+ year old baseline data was collected
  • No representative baseline data exists from within the past 3 years and include explanation of why such data is not available 

The following baseline data is required for each operating mode and must be included with the Technical Report accompanying the CI Application:

  • Description of the operating mode
  • Daily average fossil feedstock feed rate
  • Daily average hydrogen consumption
  • Daily average energy inputs (electricity, natural gas, steam, fuel gas, etc.)
  • Daily average use of other chemical additives
  • Daily average production rate and yield for each product and co-product
  • Where needed to establish the CI in the co-processing scenario, additional testing to establish density, energy content, sulphur content, CO & CO2 content, hydrogen purity and carbon content, among other parameters

2.2. Benchmark Data or Alternate Data

2.2.1. 1-year fuel codes

Applicants seeking a 1-year fuel code can select one of the following options to determine the CI modelling inputs. Where trial run or benchmark data is used, it must be gathered within 3 years of the CI application date. The following benchmark data is required, and must be included in the Technical Report accompanying the CI Application:

1. Trial Run Data

2. Design Data

3. Benchmark Data, as outlined below for 3-year fuel codes

2.2.2. 3-year fuel codes

To be eligible for a 3-year fuel code, applicants must have been co-processing for 12 or more months and must collect a minimum of 7 consecutive days of benchmark data for each operating mode and renewable feedstock. Benchmark data must be gathered within 3 years of the CI application date. 

During the benchmarking period, applicants must ensure that operating conditions are representative and that the renewable feedstock feed rate is at or above the maximum feed rate that will occur when fuel is produced for compliance reporting. The following benchmark data is required, and must be included in the Technical Report accompanying the CI Application: 

  • Description of the operating mode  
  • Daily average feedstock feed rates (biogenic and fossil)
  • Renewable content testing of finished fuel and co-products (see Section 2.3 - Renewable Content Testing)
  • Daily average hydrogen consumption
  • Daily average energy inputs including electricity, natural gas, steam, fuel gas, etc.
  • Daily average use of other chemical additives
  • Daily average production rate and yield for each product and co-product
  • Additional testing, as needed, to establish fuel CI (e.g. density, energy content, sulphur content, CO & CO2 content, hydrogen purity, etc.) 

2.2.3. Mixed Feedstock Benchmarking

Whenever possible, benchmark data should be gathered using a single biogenic feedstock. In facilities that cannot maintain separation of biogenic feedstocks (i.e. facilities that have a single biogenic feedstock supply tank for multiple feedstocks), separate benchmarking runs may be completed at the highest achievable concentrations of each feedstock type. For example, if a facility co-produces renewable diesel using both canola oil and tallow feedstocks, they should complete the following benchmarking runs: 

  • At maximum possible canola oil feedstock concentration (for canola benchmarking) 
  • At maximum possible tallow feedstock concentration (for tallow benchmarking) 

The Ministry will consider applications where benchmark data is gathered from mixed biogenic feedstock co-processing (at any ratio) if the following conditions are met: 

  • Justification is provided for why inputs are equal between the biogenic feedstocks in question. This must be a technical explanation of why assumptions are valid, or a presentation of empirical evidence supporting the claim. 
  • A professional engineer provides a signed and sealed statement confirming that hydrogen, energy and chemical inputs are equal for the feedstocks in question, and confirming the validity of the justification provided. 

2.3. Renewable Content Testing

Carbon-14 (C-14) testing is used to determine the amount of renewable carbon present in a co-processed fuel or co-product. Under the LCFS, C-14 testing is required to determine the fraction of renewable fuel in co-processed fuels as well as the fraction of co-products attributable to the renewable fuel volume. For co products with renewable content, C-14 testing is required only when the coproduct has a significant impact on the CI of the renewable fuel. 

This data is required for compliance reporting and CI calculations. Information supporting CI calculations must be included with the Technical Report accompanying the CI Application. Information for compliance reporting must be retained and made available upon request.

All samples must be obtained immediately downstream from the co-processing unit or from the final holding tank of the co-processed fuel. 

2.3.1. CI modelling: 1-year fuel codes 

Liquid fuels and co-products: 

  • Option 1: One representative Method B sample per operating mode gathered during representative co-processing 

  • Option 2: Design data with rationale for why C-14 testing was not possible prior to applying for a fuel code 

Gaseous fuels and co-products (excluding steam): 

  • Option 1: One representative Method B sample and one gas chromatograph sample per operating mode gathered during representative co-processing 
  • Option 2: Design data with rationale for why C-14 and gas chromatograph testing were not possible prior to applying for a fuel code 

2.3.2. CI modelling: 3-year fuel codes

Liquid fuels and co-products:

  • Option1: Two representative Method B samples per operating mode attained during the benchmarking period
  • Option 2: Daily representative Method C samples and one representative Method B sample taken during the benchmarking period for each operating mode 

Gaseous fuels and co-products:

  • Testing as described in Option 1 or Option 2 above for liquid fuels and co-products, and
  • One gas chromatograph sample taken during the benchmarking period per operating mode

Alternate methods of demonstrating the biogenic content of gaseous fuels and co-products may be used if rationale supporting their accuracy is provided. 

2.3.3. Volume determination for compliance reporting (all fuel codes)

Liquid fuels:

  • Option 1: Monthly representative Method B samples
  • Option 2: Weekly representative Method C and quarterly representative Method B samples  

Gaseous fuels:

  • Testing as described in Option 1 or Option 2 above, and
  • One gas chromatograph sample taken during the benchmarking period per operating mode

Alternate methods of demonstrating the biogenic content of gaseous fuels and co-products may be used if rationale supporting their accuracy is provided. 

2.4. Flowmeter Requirements

These requirements apply to flowmeters that inform both CI modelling and compliance reporting. Flowmeter specifications and locations must be outlined in the Technical Report accompanying the CI Application.

2.4.1. 1-year fuel codes

Fuels and co-products:

  • Option 1: Custody transfer grade flowmeters (e.g. Coriolis meter)
  • Option 2: Flowmeters with ± 5% accuracy (e.g. orifice meters)
  • Option 3: The applicant may specify the current metering system, including its location, accuracy level, and relevant standards met 

2.4.2. 3-year fuel codes

Fuels:

  • Option 1: Custody transfer grade flowmeters (e.g. Coriolis meter)
  • Option 2: Measurement system with ± 1% accuracy (e.g. orifice meters)
  • Option 3: The applicant may specify the current metering system, including its location, accuracy, and relevant standards met and submit a plan outlining the installation timeline for custody transfer grade flowmeters, or a measurement system with ± 1% accuracy, by the next major planned maintenance event (i.e. next turnaround cycle)

Co-products:

  • Option 1: Flowmeters with ± 5% accuracy (e.g. orifice meter)
  • Option 2: The applicant may specify the current metering system, including its location, accuracy, and relevant standards met and submit a plan outlining the installation timeline for a flowmeter with ± 5%  accuracy by the next major planned maintenance event (i.e. next turnaround cycle) 

3. Allocation Methodologies

This section outlines acceptable methods of allocating inputs to the biogenic portion of the co-processed fuel. Allocation is required to determine appropriate inputs for CI modelling. 

3.1. Hydrogen

Hydrogen allocation is determined based on daily average hydrogen consumption data gathered during the benchmarking period, with reference to the baseline data.

Applicants must provide the daily average hydrogen consumption in the benchmark data and baseline data, explain how allocation is calculated based on this data, and explain how the input value for GHGenius was determined. Where trial run or design data is used for 1-year fuel codes, applicants must justify how they determined the hydrogen input value for GHGenius. This information must be provided in the Technical Report that accompanies the CI application.  

3.2. Chemical and Energy Inputs

Chemical and energy input allocation is determined based on daily average input data gathered during the benchmarking period, with reference to the baseline data.

For all energy and chemical inputs with a significant impact on the CI of the renewable fuel portion, applicants must provide the daily average input data in the benchmark data and baseline data, explain and justify the allocation method they used, and explain how they determined the GHGenius modelling inputs. Where trial run or design data is used for 1-year fuel codes, applicants must justify how they used this data to determine the GHGenius modelling inputs. This information must be provided in the Technical Report that accompanies the CI Application.  

4. Co-processing Methodology Checklists 

The following checklists summarize the requirements for 1-year and 3-year fuel codes. Refer to the Glossary and links for detailed requirements, and to RLCF-008 How to Complete a Carbon Intensity Application for general guidance on completing CI Applications. 

TABLE 1: 1-YEAR FUEL CODE REQUIREMENTS

Category Requirements
Baseline Data

A minimum of 7 consecutive days of data covering each operating mode collected within three years of the application date. Baseline data collected 3+ years from the application may be accepted if rationale supporting the representativeness of the 3+ year old data is provided.

The following baseline data is required for each operating mode:

  • Description of the operating mode
  • Daily average fossil feedstock feed rate
  • Daily average hydrogen consumption
  • Daily average energy inputs
  • Daily average use of other chemical additives
  • Daily average production rate and yield for each product and co-product
  • Additional testing, as needed, to establish the renewable fuel CI  
Benchmark or Alternate Data 

One of the following:

  • Trial Run Data
  • Design Data
  • Benchmark data, as outlined for 3-year fuel codes 
Renewable Content Testing 

Sampling location 

  • Immediately downstream from the co-processing unit or from the final holding tank of the co-processed fuel 

Volume determination

  • Option 1: Monthly representative Method B samples
  • Option 2: Weekly representative Method C and quarterly representative Method B samples
  • Monthly gas chromatograph samples (for all gaseous fuels) 

CI modelling 

Liquid fuels and co-products

  • Option 1: One representative Method B sample per operating mode gathered during representative co-processing
  • Option 2: Design data with rationale for why C-14 testing was not possible prior to applying for a fuel code

Gaseous fuels and co-products

  • Option 1: One representative Method B sample and one gas chromatograph sample per operating mode gathered during representative co-processing
  • Option 2: Design data with rationale for why C-14 and gas chromatograph testing were not possible prior to applying for a fuel code 
Flowmeter Requirements

One of the following:

  • Custody transfer grade flowmeters (e.g. Coriolis meter)
  • Flowmeters with ± 5% (e.g. orifice meter)
  • Specify the current metering system (location, accuracy, standards met, etc.) 
Hydrogen Allocation

One of the following:

  • Explain how allocation was calculated based on the benchmark data and baseline data and explain how the input value for GHGenius was determined
  • Where trial run or design data is used, justify how the input value for GHGenius is determined 
Chemical and Energy Input Allocation

One of the following:

  • Explain how allocation was calculated based on the benchmark data and baseline data and explain how the input values for GHGenius were determined
  • Where trial run or design data is used, justify how the input value for GHGenius is determined

TABLE 2: 3-YEAR FUEL CODE REQUIREMENTS

Category Requirements
Baseline Data

A minimum of 7 consecutive days of data covering each operating mode collected within three years of the application date. Baseline data collected 3+ years from the application may be accepted if rationale supporting the representativeness of the 3+ year old data is provided.

The following baseline data is required for each operating mode:

  • Description of the operating mode
  • Daily average fossil feedstock feed rate
  • Daily average hydrogen consumption
  • Daily average energy inputs
  • Daily average use of other chemical additives
  • Daily average production rate and yield for each product and co-product
  • Additional testing, as needed, to establish the renewable fuel CI  
Benchmark or Alternate Data

7 consecutive days of benchmark data for each operating mode including: 

  • Description of the operating mode
  • Daily average feedstock feed rates
  • C-14 testing of finished fuel and co-products
  • Daily average hydrogen consumption
  • Daily average energy inputs
  • Daily average use of other chemical additives
  • Daily average production rate and yield for each product and co-product
  • Additional testing, as needed, to establish the renewable fuel CI  
Renewable Content Testing

Sampling location

Immediately downstream from the co-processing unit or from the final holding tank of the co-processed fuel Volume determination

  • Option 1: Monthly representative Method B samples
  • Option 2: Weekly representative Method C and quarterly representative Method B samples
  • Monthly gas chromatograph samples (for all gaseous fuels)

CI modelling

Liquid fuels and co-products

  • Option 1: Two representative Method B samples per operating mode taken during the benchmarking period
  • Option 2: Daily representative Method C samples and one representative Method B sample taken during the benchmarking period for each operating mode

Gaseous fuels and co-products

  • Testing as describes for liquid fuels and co-products
  • One gas chromatograph sample taken during the benchmarking period per operating mode
Flowmeter Requirements

Co-processed fuels

  • Option 1: Custody transfer grade flowmeters
  • Option 2: Measurement system with ± 1% accuracy
  • Option 3: Specify the current metering system and submit plan to meet Option 1 or 2 

Co-products

  • Option 1: Flowmeters with ± 5% accuracy
  • Option 2: Specify the current metering system and submit plan for installation of flowmeter with ±5% accuracy 
Hydrogen Allocation

All of the following:

  • Explain how allocation is calculated based on the benchmark data and baseline data
  • Explain how the input value for GHGenius was determined 
Chemical and Energy Input Allocation

All of the following: 

  • Explain how allocation is calculated based on the benchmark data and baseline data
  • Explain how the input value for GHGenius was determined 

This information is for your convenience and guidance only and does not replace or constitute legal advice. It is recommended that parties who may be a fuel supplier review the Low Carbon Fuels Act, Low Carbon Fuels (General) Regulation and the Low Carbon Fuels (Technical) Regulation and seek independent legal advice to confirm their status, legal obligations and opportunities.