Calibrate YSI Pro Solo ODO Field Meter guide

Last updated on May 12, 2022

Below is a visual guide on how to calibrate your YSI Pro Solo ODO Field Meter.

IMPORTANT: The YSI Pro Solo ODO Field Meter MUST be calibrated for EVERY sampling event.
To get accurate readings the meter depends on Barometric pressure, which varies daily, so the meter has to be calibrated each time you sample.

You can also click on the image above to view in full screen.

Video: YSI Pro Solo (Setup and Calibration)

Watch a related video below on how to setup and calibrate your YSI Pro Solo.

Source: NWT Association of Communities

Monitoring resources

Program home page

Equipment and training guides
- Bottle guide
- Calibrate YSI Pro Solo ODO Field Meter guide
Reports and publications
Glossary of terms
B.C. Lake Monitoring Map Portal
Tips to keep your lake healthy

Contact information

If you have any questions about the field meter guide:

Contact the aquatic stewardship coordinator.

Did you find what you were looking for?

The B.C. Public Service acknowledges the territories of First Nations around B.C. and is grateful to carry out our work on these lands. We acknowledge the rights, interests, priorities, and concerns of all Indigenous Peoples - First Nations, Métis, and Inuit - respecting and acknowledging their distinct cultures, histories, rights, laws, and governments.